Home How to Pdr Mastery: Mastering the Art of Paintless Dent Repair With the Right Tools

Pdr Mastery: Mastering the Art of Paintless Dent Repair With the Right Tools

by Taisa Gay

There has been an increasing demand for PDR, aka Paintless Dent Repair, for the right reasons. Instead of sending your cars to a mechanic and spending tons of dollars on dent repairs, you can now perform DIY paintless dent repairs using PDR tools. These tools are designed to correct minor dents, especially those caused by hails and car collisions.

If you are like most car owners, you might drive your vehicle to work every day. So, it won’t be a good idea to send it to a mechanic and wait for days to correct a minor dent.

Fortunately, that’s no longer needed. With advanced PDR tools, fixing the hollows on your car’s surface is not a hassle anymore. All you need is the set of the right automotive tools, such as PDR glue, dent lifter, and hook bar, and your car will look as good as new.

How Does It Work?

source:.rac.co.uk

The technique is relatively simple, especially if you are considering the glue method. It is effective and compatible with steel and metal doors. If your car has dents in hard-to-access spots, the glue method can help get the dent removed.

You can DIY the dent fixing if it’s a small dent with no severe scratches or damage to the paint. Once you have gathered the necessary tools, you can begin the repair process with PDR tabs. These are to be attached to the exterior part of the car’s horizontal panel. The tabs will then pull the dents out effectively.

DIY paintless dent repair can be performed by mechanics or car owners with experience pulling minor dents out. The goal is to restore the flat surface, which can be done by shrinking the metal. If you are trying the glue method, it’s best to leave the job to a professional, as they have the best glue and the required experience to do it correctly. Let’s check out the steps for fixing dents with the glue-pulling method.

  1. Apply a small amount of glue to the glue tab. It would be best if you had a glue gun for this.
  2. Stick the tab to the affected area and let it sit for a minute or two.
  3. Apply dent remover to the tab, and with the help of an apparatus, get the glue tab pulled out of the vehicle’s surface.
  4. Using the tab removal spray, you can get the glue tab and the glue out.

There you go! Once you have pulled the tab, the car’s surface will be flat again. The entire procedure is executed without causing any damage to the factory paint.

Tips For Mastering the Paintless Dent Removal Method

source:popularmechanics.com

PDR technique is used for many car damages, but it’s most effective for minor dents caused by hail, sports equipment, and collision. For instance, a dent caused by a swinging car door that collides with your vehicle can be fixed with PDR.

Note that some damages are not repairable with PDR. Most dents are round-shaped and cause a hollow on the car’s surface without scratching the paint. They might be up to 2 inches in diameter or wider, depending on what caused the dent. If the metal has been stretched beyond repair or the paint is removed from the surface, you might need to send the car to a technician for a proper fix.

Creases are different. These are straight lines that appear below the dent and show up when a falling object comes in contact with the car’s surface. Deep dents caused by a flying ball or another hard object hitting your car are hard to fix with PDR. It’s especially difficult to preserve the car’s paint. The worst of all is the hail damage. Although it’s fixable with PDR tools, the damage caused by hail can break window glasses and cause several dents with creases, making repair quite expensive.

Here’s how to master PDR.

Start With the Tools

The right PDR tools can effortlessly pull most dents out of the car’s panel. The glue, glue tab, dent remover, and spray are essential tools to restore the car’s surface while preserving its finish. It’s best to consult a mechanic or a professional to determine the best and most cost-effective dent repair tool.

Keep Practicing

If you plan on making a career in dent removal with PDR, regular practice will help. Don’t just focus on minor dents or the same kinds of damage. Practice on all sorts of dents, including the ones caused by flying rocks, hails, swinging car doors, and collisions. The goal is to pull them without scratching the original paint.

Use E-Books

PDR is not as simple as painting your car’s surface. Removing the dent without overstretching the metal or damaging the factory finish can get tricky, especially for those with no experience in this industry. It’s advisable to use dent removal ebooks to learn about the best ways to pull out the dent effectively. In-person training is highly effective for PDR.

Attend seminars, read PDR articles, and watch mechanics perform it live to know the proper techniques. You can also learn from paintless dent repair tutorial videos. You should take on small dent removal projects for practical experience.

Seek Professional Help

source:automoblog.net

While DIY paintless dent repair is a great option for those who want to save money and time on their vehicle repair, it’s quite challenging. Even if you know the correct technique to perform PDR on your own, you will need a set of dent repair tools that can cost you hundreds of dollars.

Unless you are considering a career in this industry, buying PDR glue and other equipment to fix a simple dent doesn’t make sense. That’s too much for a single automotive repair job. It’s best to seek help from a professional mechanic.

These were some tips on repairing car dents with paintless dent repair tools. It’s a comparatively cost-effective and less time-consuming technique than automotive repair services. There’s also a good chance your car’s original paint will be retained throughout the process. Hope it helped you understand PDR and the different tools to master the technique.

Leave a Comment